Desde www.thatexplainsalot.com, les comparto un interesante artículo acerca de la optimización de wordpress, que cubre desde mejoras en el cache del navegador y del servidor, hasta algunos trucos para mejorar el rendimiento del MySql. Se los recomiendo.
WordPress Optimization Bible
If you ever experienced slow WordPress admin panel, “MySQL server has gone away” message, pages taking forever to load or you want to prepare your site for a major increase in traffic (for example Digg front page) this is the guide for you.
1. Check the Site stats
Yslow module will allow you to get a performance score from 0-100. Getting your site to 80+ score should be your aim.
Try to keep your page size under 100KB. Try to keep it under 50kb if possible. If you have a lot of multimedia content then by all means learn to use YSlow.
Learn about ways to improve the page loading speed.
Another useful Firefox extension worth checking out is Google’s Page Speed.
2. Check your (Vista) System
In rare occasions when you are loading your and other sites slowly, it can be your Vista system that is causing the slowdown.
If you are running Vista check this article for a diagnosis and a possible solution.
3. Check the Plugins
Plugins are usually the prime suspect for slowdowns. With so many WordPress plugins around, chance is you might have installed a plugin which does not use the resources in an optimum way.
To check plugins, deactivate all of them and check the critical areas of the site again. If everything runs OK, re-enable the plugins one by one until you find the problematic plugin.
After finding the cause you can either write a message to the plugin author and hope they fix it or search for an alternative.
4. Check your Theme
If it’s not the plugins, and you are troubleshooting slowdown of the site, you should check it with a different theme.
Themes can include code with plugin capabilities inside the theme’s function.php file so everything what applies to plugins can apply to the theme.
WordPress comes installed with a default theme and it’s best used to test the site if your theme is the suspect for poor performance.
If you discover your theme is causing the slowdowns, you can use the excellent Firebug tool for Firefox browser to debug the problem. Learn more about Firebug, your new best friend.
You can also use this site get general information about the site very fast.
5. Optimize Database Tables
Database tables should be periodically optimized (and repaired if necessary) for optimum performance.
I recommend using WP-DBManager plugin which provides this functionality as well as database backup, all crucial for any blog installation.
WP-DBManager allows you to schedule and forget, and it will take care of all the work automatically.
Other alternative is manually optimizing and repairing your table through a tool like phpmyadmin.
6. Turn off Post Revisions
With WordPress 2.6, post version tracking mechanism was introduced. For example, every time you “Save” a post, a revision is written to the database. If you do not need this feature you can easily turn it off by adding one line to your wp-config.php file, found in the installation directory of your WordPress site:
If you have run a blog with revisions turned on for a while, chance is you will have a lot of revision posts in your database. if you wish to remove them for good, simply run this query (for example using the mentioned WP-DBManager) plugin.
DELETE FROM wp_posts WHERE post_type = “revision”;
This will remove all “revision” posts from your database, making it smaller in the process.
NOTE: Do this with care. If you are not sure what you are doing, make sure to at least create a backup of the database first or even better, ask a professional to help you.
7. Implement Caching
Caching is a method of retrieving data from a ready storage (cache) instead of using resources to generate it every time the same information is needed. Using cache is much faster way to retrieve information and is generally recommended practice for most modern applications.
The easiest way to implement caching (and usually the only way if your blog is on shared hosting) is to use a caching plugin.
The most commonly used is WP Super Cache.
A new kid on the block, W3 Total Cache is more powerful alternative, maturing with every day.
8. MySQL Optimization
MySQL can save the results of a query in it’s own cache. To enable it edit the MySQL configuration file (usually /etc/my.cnf) and add these lines:
query_cache_type = 1
query_cache_limit = 1M
query_cache_size = 16M
This will create a 16 MB query cache after you restart the MySQL server (the amount depends on the amount of available RAM, I use around 250MB on 4GB machine).
To check if it is properly running, run this query:
SHOW STATUS LIKE ‘Qcache%’;
Qcache_free_blocks 718 Qcache_free_memory 13004008 Qcache_hits 780759 Qcache_inserts 56292 Qcache_lowmem_prunes 0 Qcache_not_cached 3711 Qcache_queries_in_cache 1715 Qcache_total_blocks 4344
Further MySQL Optimization:
There a lot of options you can play with so here is my MySQL config file instead, tuned in for 4GB, quad-core dedicated machine. This will most probably not work for your machine out of box, use it just as a general guideline.
bulk_insert_buffer_size = 8M
max_heap_table_size = 32M
query_cache_limit = 4M
query_cache_size = 250M
query_cache_type = 1
query_prealloc_size = 65K
query_alloc_block_size = 128K
tmp_table_size = 32M
# for slow queries, comment when not used
nice = -5
open_files_limit = 8192
max_allowed_packet = 16M
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M
Extremely useful mysqlrepot tool will help you tweak that mysql like nothing. Mysql tuner is one of the best and quickest tools out there to tell you how can you fix up your database. MySQL Tuning primer and MySQL Activity Report are another two scripts to try out.
Maatkit is an extremely useful toolkit for managing MySQL.
MySQL slow query log is valuable for getting info about most problematic queries. To activate it you can edit your my.cnf
This will create a log of slow queries and those not using indexes. Now you need to be able to identify the slow ones for which you can use external slow log filter and parsing tools. Using ‘EXPLAIN‘ is an effective way to understand and optimize complex queries.
You can also install mytop, a ‘top’ command clone that works with MySQL.
9. PHP Opcode Cache
PHP is interpreted language, meaning that every time PHP code is started, it is compiled into the so called op-codes, which are then run by the system. This compilation process can be cached by installing an opcode cache such as eAccelerator. There are other caching solutions out there as well.
To install eAccelerator, unpack the archive and go to the eAccelerator folder. Then type:
This will install eAccelerrator.
Next create temp folder for storage:
chmod 0777 /var/cache/eaccelerator
Finally to enable it, add these lines to the end of your php.ini file (usually /etc/php.ini or /usr/lib/php.ini):
The changes will be noticeable at once, as PHP does not need to be ‘restarted’.
Note #1: WP Super Cache and eAccelerator work fine together showing further increase in performance.
Note #2: If you like even more possibility for performance, check the WP Super Cache and eAccelerator plugin.
Note #3: Unfortunately eAccelerator won’t work if PHP is run as CGI. You can try using fastcgi which will work with suExec and eAccelerator.
Note #4:W3 Total Cache mentioned earlier already utilities both memcached and APC making it amazingly fast.
10. Web Server optimization
Apache optimization is something books have been written on so I will first forward you to this article here. Indepth apache compilation tips here, performance tuning here, VPS tips here and keep alive tips here.
You can easily test changes in your configuration by running a test from your command prompt
ab -t30 -c5 http://www.mysite.com/
and comparing results. I get around 200 req/s on VPS server.
Note #2: You can find even more tips&tricks on Elliot Back’s site
11. “MySQL server has gone away” workaround
This WordPress database error appears on certain configurations and it manifests in very slow and no response, usually on your admin pages.
Workaround for this MySQL problem has been best addressed in this article.
This problem evidently exists, but the suggested fix is valid only until you upgrade your WordPress. Hopefully it will be further researched and added into the WordPress core in the future.
Note #1: Sometimes increasing MySQL wait_timeout to 1000 will help with this issue.
12. Fixing posting not possible problem
If you experience WordPress admin panel crawling to a halt, with inability to post or update certain posts, you are probably hitting the mod_security wall.
ModSecurity is Apache module for increasing web site security by preventing system intrusions. However, sometimes it may decide that your perfectly normal WordPress MySQL query is trying to do something suspicious and black list it, which manifests in very slow or no response of the site.
To test if this is the case, check your Apache error log, for example:
tail -f /usr/local/apache/logs/error_log
and look for something like this:
ModSecurity: Access denied with code 500 (phase 2) … [id “300013”] [rev “1”] [msg “Generic SQL injection protection“] [severity “CRITICAL”] [hostname www.prelovac.com”] [uri “/vladimir/wp-admin/page.php”
It tells you the access for this page was denied because of a security rule with id 300013. Fixing this includes white-listing this rule for the page in question.
To do that, edit apache config file (for example /usr/local/apache/conf/modsec2/exclude.conf) and add these lines:
This will white list the page for the given security rule and your site will continue to work normally.
13. RSS Pings and Pingbacks
Reasons for slow WordPress posting may include rss ping and pingback timeouts.
By default WordPress will try to ping servers listed in your ping list (found in Settings->Writing panel) and one of them may timeout slowing the entire process.
Second reason are post pingbacks, mechanism in which WordPress notifies the sites you linked to in your article. You can disable pingbacks in Settings->Discussion by un-checking option “Attempt to notify any blogs linked to from the article (slows down posting)“.
Try clearing ping list and disabling pingbacks to see if that helps speed up your posting time.
Following are the general Rules for optimizing page loading time
14. Use subdomains to share the load
Most browsers are set to load 2-4 files from a domain in parallel. If you move some files to a different domain (subdomain will work) the browser will start downloading 2-4 more files in parallel.
It is good idea to move your theme image files to a subdomain you create. I have created demo.prelovac.com/images and moved my theme images there. I have then changed the theme style.css to reflect the full url to the new image files. Job done!
15. Minimize the number of HTTP requests
Also use the CSS Sprite generator to move all your images into one image and then use CSS background-position to display them. This will cut your number of HTTP requests significantly.
16. Compress the content using apache .htaccess
If you have our own server you can chose to gzip all content sent to browsers. This will lower the loading time significantly as most html pages compress very well.
Add this code to your .htaccess
17. Create expires headers
Expire headers tell the browser how long it should keep the content in cache. Most of the images on your site never change and it is good idea to keep them cached locally.
Add this to your .htaccess (make sure mod_expires is loaded in your apache if you have problems)
<FilesMatch "\.(ico|jpg|jpeg|png|gif|js|css|swf)$"> ExpiresActive on ExpiresDefault "access plus 30 days" Header unset ETag FileETag None </FilesMatch>
Here is an alternative setting:
Header unset Pragma FileETag None Header unset ETag # 1 YEAR Header set Cache-Control "public" Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT" Header unset Last-Modified # 2 HOURS Header set Cache-Control "max-age=7200, must-revalidate" # CACHED FOREVER # MOD_REWRITE TO RENAME EVERY CHANGE Header set Cache-Control "public" Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT" Header unset Last-Modified
Use cacheability engine to check your cache configuration.
18. Cache Gravatars
Many blogs use Gravatars, the little images next to your comments. However gravatars have two big flaws in regards to site optimization:
- Every gravatar image is a new HTTP requests even if same image is loaded (page with 100 comments would have 100 additional HTTP requests)
- Gravatar images do not contain expire headers
What we can do is create a local gravatar cache, where images would be cached and served from our site. Ideally you would place the gravatar cache on a separate subdomain (see first heading).
I use a plugin from Zenpax.com which allows all gravatars to be cached locally.
19. Optimize the images with smush.it
It is often overlooked that your images can be optimized (made smaller) which can significantly reduce loading times.
Wouldn’t it be perfect if you could open a site, press a button in your browser and get all images on the site optimized and made available in a single zip file. That is possible thanks to smush.it and their Firefox plugin. It is amazing how effective this is!
Modern webservers and websites have grown to depend on many different factors.
This article covered various approaches to optimization from system level apache, PHP and MySQL changes to settings within your WordPress.
I hope following this guide will help you create a fast and responsive WordPress based site.